Connecting a cable converter box
This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television.
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service which requires the use of a Con- verter/Descrambler box, connect the incoming cable to the Converter/ Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown left. Set the television to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.
Welcome to Toshiba
Important | Safeguards |
Connecting your TV
For Subscribers to Unscrambled Basic Cable with Scram- bled Premium Channels
If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require the use of a Converter/ Descrambler box, you may wish to use a
Note:
When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as labeling channels, blocking channels, and programming your favorite channels.
Using the Remote Control
Converter/ Descrambler
Converter/ Descrambler 
Splitter | A / B Switch A B |
| IN | Y | OUT | |
|
|
| ||
VIDEO |
| VIDEO | ||
ANT (75Ω ) |
| PB |
| |
L/MONO | L/MONO | |||
| ||||
AUDIO | PR | AUDIO | ||
|
| |||
| R |
| R | |
| VIDEO 1 | VIDEO 2 |
| |
Setting up your TV
Using the TV’s Features
5
Appendix
3K10601B | 5 | 21/08/2001, 14:28 |
