Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control. (See “Programming the remote control for use with a VCR or a cable TV converter” on page 9.)
Installing the remote control batteries
To install the batteries:
1. Open the battery cover of the back of the remote control.
Note:
This remote control’s functions may or may not operate your VCR or cable TV converter. Refer to the owner’s manuals supplied with the equipment to see which features are available. In addition, the original controllers may have features not available on this remote control. If you would like to continue to use these features, you may want to use the original remote control.
Using the Remote Control
2.Install two “AAA” size batteries. Match the + and – signs on the batteries to the signs on the battery compartment.
3. Close the battery cover on to the remote control until the lock snaps.
Caution:
•Dispose of your batteries in a designated disposal area. Do not throw your batteries into a fire.
•Do not mix battery types or combine used batteries with new ones.
•Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
•If you do not intend to use the remote control for a long time, remove the batteries.
Using the remote control with a VCR or a cable TV converter
To control a Toshiba | VCR |
VCR: | Power |
| |
Press the VCR button | Enter |
first. The buttons | |
shown to the right will | Channel |
then control the VCR. | Numbers |
The rest of the buttons |
|
will operate the TV as |
|
usual. |
|
Fast Forward
Play
Rewind
TV/VCR
Record
Stop
VCR CH ▲ /▼
Pause/Still
POWER | TV | VCR | CABLE |
|
|
| CH RTN |
1 | 2 | 3 | ENT |
4 | 5 | 6 | 100 |
7 | 8 | 9 | 0 |
| CH + |
| |
VOL |
|
| VOL |
– |
|
| + |
| MENU/ |
| |
| ENTER |
| |
| CH – |
| |
EXIT | RECALL | TV/VIDEO FAV | |
RESET | CAP/TEXT | 1/2 | FAV |
CODE | MTS | SLEEP | MUTE |
REW | PLAY | FF | |
TV/VCR | STOP | PAUSE/STILL | |
REC |
| VCR CH | |
To control a cable TV converter:
Program the remote control to recognize the brand of your converter (see “Programming the remote control for use with a VCR or cable TV converter”, on page 9). The buttons shown on the right will control the cable TV converter. Press the CABLE button first.
POWER | TV | VCR | CABLE |
|
|
| CH RTN |
1 | 2 | 3 | ENT |
4 | 5 | 6 | 100 |
7 | 8 | 9 | 0 |
| CH + |
| |
VOL |
|
| VOL |
– |
|
| + |
| MENU/ |
| |
| ENTER |
| |
| CH – |
| |
EXIT | RECALL | TV/VIDEO FAV | |
RESET | CAP/TEXT | 1/2 | FAV |
CODE | MTS | SLEEP | MUTE |
REW | PLAY | FF | |
TV/VCR | STOP | PAUSE/STILL | |
REC |
| VCR CH | |
8
3K10601B | 8 | 21/08/2001, 14:29 |
