Motorola CPEI 750 manual Lease Status Tab, Lease Reservation Tab, Field or Button, Description

4 Advanced Configuration

Table 4-3DHCP Server Tab

Field or Button	Description
DHCP Ending IP Address	Sets the final IP address assigned by the
	DHCP server. If the DHCP server runs out
	of DHCP addresses, users cannot access
	network resources. If this happens,
	increase the Ending IP or reduce the
	Lease Time.
DHCP Lease Time	Sets the time, in seconds, that a network
	computer remains connected to the
	gateway using its current assigned IP
	address. At the end of this time, the DHCP
	server renews the lease or assigns the
	computer a new IP address. The default is
	3600 seconds (one hour). The maximum is
	999999 seconds (about 278 hours).

Be sure to click the Apply button once you have made changes.

Lease Status Tab

The Lease Status tab in the Local Address menu displays the active DHCP leases since the last reboot. The Lease Status Tab contains the following selections:

Table 4-4Lease Status Tab

Field or Button	Description
Client Host Name	Displays the client host name. The Name
	field is limited to 20 characters (only 5
	appear in display).
MAC Address	Media Access Control (MAC) address.
IP Address	Shows the IP Address for each active
	lease.
Remaining Lease Duration	Shows the amount of time, in seconds,
	remaining in the lease.

Be sure to click the Apply button once you have made changes.

Lease Reservation Tab

This tab allows you to manage the lease reservation so that the same client receives the same IP address each time. The Lease Reservation Tab contains the following selections:

4-4	68P09292A81-B
	JUN 2008