ADJUSTMENTS BEFORE OPERATION
TAPE,
TUNER/BAND,
AUX, CD
POWER 6STANDBY/ON
s
ECO
DISPLAY
| CLOCK | DISPLAY |
|
| CD, |
f,g |
| TUNER/BAND, |
| TAPE, AUX,s | |
|
| |
TONE | SET | f,g |
| ||
| SHIFT |
|
Setting the clock
1 | Hold down SHIFT and press CLOCK on the remote |
|
| control. |
|
| When the unit is turned off, you can also press SET. |
|
2 | Within 6 seconds, press for gto set the |
|
| time. | En |
| Each press changes the time in |
Holding these buttons down will vary the time in
3Press SET.
The time display stops flashing and the clock starts from 00 seconds.
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote control).
Alternatively, press TAPE, TUNER/BAND, AUX or CD. Playback will start automatically if a disc or tape is loaded.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
ECO mode
Reduces power consumption in standby mode with the following operations.
Press ECO.
Each press of the button changes the mode as follows;
ECO ON: Power economizing mode is activated.
When the unit turns off, everything on the display clears and only the red indicator above POWER lights to show that the power is being supplied.
ECO OFF: Power economizing mode is canceled. When the unit turns off, the clock display appears.
Initial mode is ECO OFF.
Standby power consumption
ECO ON: 0.7 W
ECO OFF: 10.7 W
When setting the clock on the unit in stop mode, hold down sand press gin step 1. After setting the time in step 2, press TONE in step 3.
To display the time while the power is on
Hold down SHIFT and press CLOCK on the remote control. The time will be displayed for 6 seconds.
To switch to the 24-hour standard
Display the time and press swithin 6 seconds.
With each press, the clock alternates between 12- and 24- hour standard time.
Tip:
In the
If the clock display flashes when the unit is turned off
There has been a power interruption. Reset the clock.
To change the display window brightness (Dimmer) Hold down DISPLAY (hold down SHIFT and press DISPLAY on the remote control) for about 4 seconds while the power is on.
Repeat the above to restore the brightness.
7