Aiwa XR-EM50 manual Programmed play, To check the program, To clear the program

Programmed play

Plays back up to 30 selected tracks in programmed order.

1Hold down SHIFT and press PROGRAM on the remote control in stop mode.

"PRGM" flashes on the display.

2Press the numbered buttons on the remote control to program a track.

-To select the 25th track, press +10, +10 and 5. -To select the 11th track, press +10 and 1.

The selected track number lights up on the display.

3Repeat step 2 to program other tracks.

The total number of selected tracks and total playing time will be displayed.

4Press Eto start play.

The track number for the current track flashes on the display.

•During programmed play, you cannot select a track with the numbered buttons. "Can’t USE" is displayed when you try to select a track .

•If the total playing time of the program exceeds 99 minutes and 59 seconds, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "- -:--".

•You cannot program more than 30 tracks. "FULL" is displayed.

To check the program

Press f or g repeatedly in stop mode. The track number and program number are displayed in succession.

To clear the program

Press sin stop mode. "PRGM" disappears from the display.

To add tracks to the program

Repeat step 2 before starting playback. The tracks are added to the end of the program.

To change the programmed tracks

Clear the program and repeat all the steps again.

Notes on CDs
• Do not place more than one disc.
• Do not tilt the unit with a disc loaded.
• The unit may not play CD-R/RW discs recorded on personal
computers or certain kinds of CD-R/RW recorders.
• Do not attach adhesive label to either side of
CD-R/RW discs, as doing so may cause malfunction.	En
• Do not load an unrecorded CD-R/RW disc. The disc may be
damaged.
• Do not use irregular-shaped CDs.

9