6Repeat step 5 to select the rest of the tracks for side A.
The remaining recording time of side A is displayed. You cannot select a track with a longer playing time.
7Hold down SHIFT and press CD EDIT/CHECK on the remote control to switch to side B and select the tracks for the side.
8Press wREC/REC PAUSE once to start recording. The tape is rewound to the beginning of the side facing out from the unit, "REC MUTE" flashes on the display and the lead segment is played through for 10 seconds, and recording starts.
When recording on the side facing out from the unit (side A) finishes, recording on the opposite side (side B) starts.
On the remote control, hold down SHIFT and press REC/ REC PAUSE to start recording.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, hold down SHIFT and press CD EDIT/CHECK on the remote control to select side A or B.
2 Press f or g repeatedly. The track number and program number are displayed in succession.
To change the program of each side
Hold down SHIFT and press CD EDIT/CHECK on the remote control to select side A or B, and press sto clear the program for the selected side. Then, select tracks again.
To clear the edit program
Press stwice.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver or other pointed tool. To record on the tape again, cover the detection slot with adhesive tape.
Side A
En
Tab for side A
15
