Aiwa XR-EM50 manual Sound Adjustments, Volume, Bass and treble, To switch to monaural FM reception

Models: XR-EM50

1 20
Download 20 pages 11.67 Kb
Page 11
Image 11
Adjustments

Adjustments

To switch to monaural FM reception

Hold down SHIFT and press TUNER MODE on the remote control so that "MONO" is displayed.

To cancel, repeat the above so that "STEREO" is displayed.

Tip:

When FM stereo reception is poor, switching to monaural reduces noise.

SOUND ADJUSTMENTS

To switch to monaural FM receptionSOUND ADJUSTMENTSTo switch the AM tuning intervalVolumeBass and trebleManual background VOLUME

TONE

En

To switch the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Hold down TUNER/BAND and press POWER on the main unit.

Manual backgroundVOLUME +,-

TONE

Tip:

When the AM tuning interval is changed, all preset stations are cleared.

Volume

Turn VOLUME (press VOLUME +,- on the remote control).

Adjust from 0 (minimum) to 30 and MAX (maximum).

Tip:

Volume level setting is retained during power-off standby. If the unit is turned off with the volume set to 17 or higher, it is automatically turned down to 16 the next time the unit is turned on.

Bass and treble

1Press TONE repeatedly to display "BAS" or "TRE". "BAS" : Adjusts the bass level

"TRE" : Adjusts the treble level

2Within 6 seconds, turn VOLUME (press VOLUME +,- on the remote control).

Each level can be adjusted from "–2" to "+5".

If the sound becomes distorted, lower the level.

11

Page 11
Image 11
Aiwa XR-EM50 manual Sound Adjustments, Volume, Bass and treble, To switch to monaural FM reception