
Function
Function
*In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just example to help with the Projector operation.
*If there is no input signal present, the Menu will not be displayed on the screen.
*This operating guide explains operation of RGB(PC) mode mainly.
Video Menu Options
Adjusting Video
1.Press the MENU button and then use D, E button to select the menu.
2.Press the G button and then use D , E button to select a video item you want to adjust.
3.Press the F, G button to adjust the screen condition as you want.
4.Press the AOK button to save.
●Each adjustment of menu options will not affect other input source.
As required, menu options for the following input source :
●To restore the original image condition after changing it, press AOK button after selecting [Reset] item.
●In the broadcasting system NTSC, the picture item Tint is displayed and can be adjusted.
●To exit the menu display, repeatedly, press the MENU button.
< RGB mode >
Contrast | 50 G |
Brightness | 50 |
Reset |
|
Menu Prev. |
|
< Video mode >
APC | G | Clear |
Contrast | 80 | Soft |
Brightness | 50 | User |
Sharpness | 50 |
|
Menu Prev.
APC (Auto Picture Control)
*Use APC to set the projector for the best picture appearance.
*This function will not work in RGB mode.
1.Press the MENU button and then use D, E button to select the menu.
2.Press the G button and then use D , E button to select APC item.
3.Press the G button and then use D , E button to adjust the screen condition as you want.
4.Press the AOK button to save.
●Each press of the D, E button changes the screen as shown below.
Clear |
|
|
| Soft |
|
|
| User |
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
●To exit the menu display, repeatedly, press the MENU button.
APCG
Contrast 80
Brightness 50
Sharpness 50
Menu Prev.
Clear
Soft
User
26