LG Electronics AN110B-JD, AN110W-JD owner manual Supported Monitor Display

Information

Supported Monitor Display

* The following table lists the display formats supported by the projector.

Sources	Format	Vertical Freq.(Hz)	Horizontal Freq. (kHz)
VGAEGA	640X350	70.090Hz	31.468kHz
	640X350	85.080Hz	37.861kHz
PC98 / VGA text	640X400	70.090Hz	31.468kHz
	640X400	85.080Hz	37.861kHz
	720X400	70.082Hz	31.469kHz
	720X400	85.039Hz	37.927kHz
VGA	640X480	59.940Hz	31.469kHz
	640X480	72.800Hz	37.861kHz
	640X480	75.00Hz	37.500kHz
	640X480	85.008Hz	43.269kHz
SVGA	800X600	56.250Hz	35.156kHz
	800X600	60.317Hz	37.879kHz
	800X600	72.188Hz	48.077kHz
	800X600	75.00Hz	46.875kHz
	800X600	85.061Hz	53.674kHz
XGA	1024X768	60.004Hz	48.363kHz
	1024X768	70.069Hz	56.476kHz
	1024X768	75.029Hz	60.023kHz
	1024X768	84.997Hz	68.677kHz
SXGA	1152X864	60.053Hz	54.348kHz
	1152X864	70.01Hz	63.995kHz
	1152X864	75.00Hz	67.500kHz
	1280X768	60.00Hz	47.693kHz
	1280X960	60.00Hz	60.00kHz
	1280X1024	60.020Hz	63.981kHz

*If the projector does not support the input signal, “Out of range” message appears on the screen.

*The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor)

*The Synchronization input form for horizontal and vertical frequencies are Separate, Composite and SOG.

*According to PC, the optimum vertical frequency may not be displayed up to the optimum frequency of set in

‘Registration information (Display registration information)’. (ex, The optimum vertical frequency may be displayed up to 75Hz or under in the resolution of 640X480 or 800X600.)

<DVD/DTV Input>

Signal		Component-*1	RGB(DTV)-*2
	480i	O	X
NTSC(60Hz)	480p	O	O
	720p	O	O
	1080i	O	O
	576i	O	X
PAL(50Hz)	576p	O	O
	1080i	O	O

* Cable type

1- RCA to D-Sub Adaptor

2- Computer Cable

41