Safety Instructions
| Power | WARNING |
|
|
|
Do not plug too many devices into one outlet.
It may result in overheating of the outlet and causes a fire hazard !
| Power | NOTES |
|
|
|
Never touch the power plug with a wet hand
This may cause an electric shock hazard !
Do not plug in when the power cord or the plug is damaged or the connecting part of the power outlet is loose.
This may cause a fire or an electric shock hazard !
Hold the plug firmly when unplug- ging. If you pull the cord the cord may be damaged.
This may cause a fire hazard !
Ensure the power cord does not come into contact with sharp or hot objects such as a heater.
This may cause a fire or an electric shock hazard !
Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard !
Place the projector where people will not trip or tread on the power lead.
This may cause a fire or an electric shock hazard !
Do not turn the projector On/Off by
It may cause mechanical failure or could give an electric shock.
| Using | WARNING |
|
|
|
Do not place anything containing liquid on top of the projector such as flowerpot, cup, cosmetics or candle.
This may cause a fire hazard !
If water is spilt into the projector, unplug it from the outlet immedi- ately and consult a Service Agent.
This may cause an electric shock haz- ard !
In case of impact shock or damage to the projector, switch it off and unplug it from the outlet. Contact a service center.
This may cause a fire or an electric shock hazard !
Dispose of used batteries care- fully and safely.
In the case of a battery being swallowed by a child please consult a doctor immediately.
Do not allow any objects to fall into the projector.
This may cause an electric shock hazard !
In the event that an image does not appear on the screen, please switch the unit off and unplug it from power outlet. Contact a Service Agent.
This may cause a fire or an electric shock hazard !
Do not remove any covers (except lens cover). High risk of Electric Shock!
Don’t look directly onto the lens when the projector is in use. Eye damage may occur!
Do not touch metal parts during or soon after operation since the vents and lamp cover will remain very hot!
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is,a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits.Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords, frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance,and if its appearance indi- cates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
5
