Part Descriptions
Projector Status Indicators
*Lamp Indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status of the projector.
Operation Indicator
Lamp Indicator |
Temperature Indicator
| Orange | Standby. | |
| Green(flashing) | Lamp cooling until the lamp turn on. | |
Operation Indicator | Green | On operation. (Turn on the lamp) | |
| Orange(flashing) | Projector lamp is cooling as power out (2 minutes) | |
| Off | Power off. | |
|
| Projector lamp is reaching the end of its life and needs | |
| Red | to be replaced with a new lamp. (over 4000 hours) | |
| The OSD, “Replace the lamp” is displayed 5 seconds | ||
|
| ||
|
| from the first power on. | |
Lamp Indicator |
| The projector has trouble in the lamp or around it at | |
Red(flashing) | |||
| |||
|
| is red (flashing) again, contact a service center. | |
|
|
| |
| Green(flashing) | The lamp cover is not closed. | |
| Orange(flashing) | It’s state of not opening well the door or shutter. Contact a | |
| service center. | ||
| Orange | This projector is in high temperature. Turn the power of | |
| projector off and check the ventilator. | ||
|
| ||
Temperature Indicator | Red | The projector is turned off as its high temperature. | |
| Red (flashing) | Power has turned off due to problem with the | |
| internal cooling fan. Contact a service center. | ||
|
| ||
|
|
|
* If operation indicator is red, it’s state of checking the closed door or shutter.
10
