LG Electronics AN110B-JD, AN110W-JD owner manual Connecting to a Video Source, Connecting to a DVD

Connection

Connecting to a Video Source

* You can connect a VTR, a camcorder, a LDP or any other compatible video image source to the projector.

< How to connect 1 >

a. Connect the Video input jacks of the projector to the output jacks of the A/V source with Video cable.

< How to connect 2 >

b. Connect the S-Video input jack of the projector to the S-Video output jack of an A/V source with an S-Video cable.

* You can get better picture quality when connecting

S-Video source to the projector. <VCR>

S VIDEO
(R) AUDIO (L)	VIDEO
OUT
IN

Connecting to a DVD

*The output jacks (Y, PB, PR) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.

< How to connect >

a. Connect the DVD Component cable to the RCA to D-Sub Adaptor and then connect the RCA to D-Sub Adaptor to RGB Input (PC/DTV) of the projector.

*When connecting the component cable, match the jack colors with the component cable.(Y=green, PB=blue, PR=red)

b.If the DVD has HDMI output, connect HDMI cable to HDMI Input of the projector.

c.If the DVD has DVI output, connect HDMI to DVI cable to HDMI Input of the projector.

*If connecting the HDMI, audio is not supported.

d.Use a DVD with Component 480i(576i)/ 480p(576p)/720p/1080i mode.

RCA to D-Sub Adaptor

Component cable

(R) AUDIO (L)		Y	P
	DVI OUTPUT HDMI OUTPUT			P

HDMI to DVI cable

HDMI cable

<DVD>

23