show gsr
CF-677
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show gsr
To display hardware information on the Cisco 12000 series Gigabit Switch Routers (GSRs), use the
show gsr command in EXEC mode.
show gsr [chassis-info [details]]
Syntax Description
Command Modes EXEC
Command History
Usage Guidelines Use this command to determine the type of hardware installed in your Cisco 12000 series GSR router.
Examples The following is sample output from the show gsr command for a Cisco 12012 router. This command
shows the type and state of the card installed in the slot.
Router# show gsr
Slot 0 type = Route Processor
state = IOS Running MASTER
Slot 7 type = 1 Port Packet Over SONET OC-12c/STM-4c
state = Card Powered
Slot 16 type = Clock Scheduler Card
state = Card Powered PRIMARY CLOCK
The following is sample output from the show gsr chassis-info command for a Cisco 12012 router:
Router# show gsr chassis-info
Backplane NVRAM [version 0x20] Contents -
Chassis: type 12012 Fab Ver: 1
Chassis S/N: ZQ24CS3WT86MGVHL
PCA: 800-3015-1 rev: A0 dev: 257 HW ver: 1.0
Backplane S/N: A109EXPR75FUNYJK
MAC Addr: base 0000.EAB2.34FF block size: 1024
RMA Number: 0x5F-0x2D-0x44 code: 0x01 hist: 0x1A
chassis-info (Optional) Displays backplane NVRAM information.
details (Optional) In addition to the information displayed, this option includes
hexadecimal output of the backplane NVRAM information.
Release Modification
11.2GS This command was introduced to support the Cisco 12000 series GSRs.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.