22
Fault codes
Please read the following pages before you call for service.
You can correct many of your dishwasher’s problems yourself, using the checklists on the following pages.
Problem | Fault | Possible causes | What to do |
| code |
|
|
First 2 | E1 | The door is not properly closed. | Close the door firmly. |
programme |
|
|
|
indicators |
|
|
|
flashing |
|
|
|
|
|
|
|
1 and 3 | E2 | Temperature sensor faulty | Turn the water and power off to |
programme |
|
| the dishwasher. Call your Fisher |
indicator lights |
|
| & Paykel dealer or Authorised |
flashing |
|
| Service Centre. |
1 and 4 | E3 | Drain hose is too low. |
programme |
|
|
indicator lights |
|
|
flashing |
| The wash water level is too low. |
Ensure that drain hose is connected in accordance with the ‘Installation instructions’.
Programme | E4 | Drain hose is crimped or bent. |
indicators 1, 3 |
|
|
and 4 flashing |
| The wash water is not draining out. |
|
| Drain hose is too high. |
Check hose and straighten if needed.
Ensure that drain hose is connected in accordance with the ‘Installation instructions’.
First 3 | E5 | Water tap not turned on. |
programme |
|
|
indicators |
|
|
flashing |
| Insufficient water supply pressure. |
Water supply hose is crimped or bent.
Drain hose is too low.
Ensure the water is connected and turned on.
Check household water pressure.
Check hose and straighten if needed.
Ensure that drain hose is connected in accordance with the ‘Installation instructions’.
First 4 | E6 | Flood switch activated. | Turn the water off and the mains |
programme |
|
| power off to the dishwasher. Call |
indicators |
|
| your Fisher & Paykel dealer or |
flashing |
|
| authorised service centre. |
|
|
|
|
If the dishwasher still will not work, or shows any other error display:
Power the dishwasher OFF and wait for a few minutes.
Power the dishwasher ON and retry.
If the dishwasher still does not function, and/or the problem persists, contact your Fisher & Paykel Dealer or Authorised Service Centre.
