![](/images/new-backgrounds/1146391/146391313x1.webp)
System Management Commands
Command Usage
When SNTP client mode is enabled using the
Example
Related Commands
sntp-server enable
This command enables SNTP client requests for time synchronization with NTP or SNTP time servers specified by the
Syntax
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record accurate dates and times for log events. Without SNTP, the access point only records the time starting from the factory default set at the last bootup (i.e., 00:14:00, January 1, 1970).