SMC Networks SMC2555W-AG manual Exec Commands, Configuration Commands

Entering Commands

Exec Commands

When you open a new console session on the access point, the system enters Exec command mode. Only a limited number of the commands are available in this mode. You can access all other commands only from the configuration mode. To access Exec mode, open a new console session with the user name “admin.” The command prompt displays as “SMC Enterprise AP#” for Exec mode.

Username: admin

Password: [system login password]

SMC-AP#

Configuration Commands

Configuration commands are used to modify access point settings. These commands modify the running configuration and are saved in memory.

The configuration commands are organized into three different modes:

•Global Configuration - These commands modify the system level configuration, and include commands such as username and password.

•Interface-Ethernet Configuration - These commands modify the Ethernet port configuration, and include command such as dns and ip.

•Interface-Wireless Configuration - These commands modify the wireless port configuration, and include command such as ssid and authentication.

6-7