Status Information
•Access point was set to “Shared Key Authentication,” but a client sent an authentication frame for “Open System.”
•WEP keys do not match: When the access point uses “Shared Key Authentication,” but the key used by client and access point are not the same, the frame will be decrypted incorrectly, using the wrong algorithm and sequence number.
CLI Commands for Displaying the Event Logs – From the global configuration mode, use the show logging command.
Logging Information
============================================
Syslog State | : Enabled |
Logging Host State | : Enabled |
Logging Console State | : Enabled |
Server Domain name/IP | : 192.168.1.19 |
Logging Level | : Alert |
Logging Facility Type | : 16 |
=============================================
Note: Log messages are not displayed in the CLI.
