SMC Networks SMC2555W-AG manual General Commands, Configure

General Commands

General Commands

Command	Function	Mode	Page
configure	Activates global configuration mode	Exec	6-11
end	Returns to Exec mode	GC, IC	6-12
exit	Returns to the previous configuration	any	6-12
	mode, or exits the CLI
ping	Sends ICMP echo request packets to	Exec	6-13
	another node on the network
reset	Restarts the system	Exec	6-14
show history	Shows the command history buffer	Exec	6-14
show line	Shows the configuration settings for the	Exec	6-15
	console port

configure

This command activates Global Configuration mode. You must enter this mode to modify most of the settings on the access point. You must also enter Global Configuration mode prior to enabling the context modes for Interface Configuration. See “Using the Command Line Interface” on page 6-1

Default Setting

None

Command Mode

Exec

Example

SMC-AP#configure

SMC-AP(config)#

Related Commands

end (page 6-12)

6-11