Brocade Communications Systems 6510, VA-40FC Configuring zones on the switch, Specifying devices

2 Configuring the switch

.

FIGURE 14 Select Zoning wizard

Typical Zoning is the default and the following procedure directs you to select Typical Zoning. When you select Typical Zoning, the wizard automatically configures the zones for you and shows you how to connect the devices to the switch. You can change the zoning configuration later, as described in “Zoning management” on page 41.

Configuring zones on the switch

1.On the Select Zoning wizard, select Typical Zoning.

If you want to use one of the other zone settings, see “Editing the zoning configuration” on page 42 for instructions on configuring Custom zoning; see the Web Tools Administrator’s Guide for information on Advanced zoning.

2.Click Next.

The Specify Devices screen is displayed.

Specifying devices

On the Specify Devices screen (Figure 15), do the following.

1.Enter the number of HBA connections that you want to attach to the switch. Be sure to include existing HBA connections, and any additional HBA connections you plan to make in the current setup session. You can change this setting later if you want to add or remove HBA connections.

2.Enter the number of storage connections you want to attach to the switch. Be sure to include existing storage connections, and any additional storage connections you plan to make in the current setup session.You can change this setting later if you want to add or remove storage connections.

18	EZSwitchSetup Administrator’s Guide
	53-1002157-01