-11-
2. Connect the power adapter cable to the switch before connecting
the adapter to the AC outlet.
2.3 Port Configuration
The switches provide port configuration function through the manage-
ment interface. The setting options are shown as follows:
Port Type TP PORTS FX PORT
Auto-negotiation Enable/Disable Not allowed
Speed options 100M / 10M Not allowed (fixed 100M)
Duplex options Full / Half Not allowed (fixed Full)
When auto-negotiation is enabled, the speed and duplex settings be-
come the port highest ability used for auto-negotiation process. The
final configurations used with the connected device may be different
from the settings after negotiation between two devices. As auto-nego-
tiation is disabled, the speed and duplex settings are the forced operating
configuration for the connection.
The real time port status for each port connection can be monitored
through the management interface. The status are:
Link Physical link status
Speed Connection speed used
Duplex Duplex mode used
Flow Control Flow control status after negotiation