Item | Values | Explanation |
|
|
|
DEFAULT PAPER | PLAIN |
TYPE | PREPRINTED |
| LETTERHEAD |
| TRANSPARENCY |
| PREPUNCHED |
| LABELS |
| BOND |
| RECYCLED |
| COLOR |
| CARDSTOCK>163 |
| ROUGH |
| ENVELOPE * |
Allows the user to specify the type of media in each tray. Substitute the tray number for <N>.
*ENVELOPE appears for Tray 1 only.
DEFAULT CUSTOM | UNIT OF MEASURE | Allows the user to set a custom paper size for any of the |
PAPER SIZE | X DIMENSION | installed trays. Substitute the tray number for <N>. This |
| Y DIMENSION | menu only appears when the selected tray custom switch |
|
| is in the custom size position. The user selects the X and Y |
|
| dimensions of the custom paper size using the ruler labels |
|
| in the trays. |
|
|
|
PAPER | STANDARD OUTPUT | Allows the user to configure the output paper bin |
DESTINATION= | LEFT OUTPUT BIN | destination. Only installed optional bins will appear on the |
STANDARD OUTPUT | STANDARD TOP BIN | menu. |
|
|
|
DUPLEX=OFF | OFF | This item appears only when an optional duplex printing |
| ON | accessory is installed. Set the value to ON to print on both |
|
| sides (duplex) or OFF to print on one side (simplex) of a |
|
| sheet of paper. |
|
| For more information, see the HP support flyer or go to |
|
| www.hp.com/support/lj9050_lj9040. |
|
|
|
DUPLEX | LONG EDGE | Allows the user to change the binding edge for duplex |
BINDING=LONG | SHORT EDGE | printing. The menu item is displayed when a duplex |
EDGE |
| printing accessory is installed in the printer and |
|
| DUPLEX=ON. |
|
|
|
OVERRIDE A4/ | YES | This command is used to print on |
LETTER= | NO | an A4 job is sent, but no |
NO |
| printer (or to print on |
|
| sent, but no letter paper is loaded in the printer). |
|
|
|
MANUAL FEED=OFF | OFF | Feed the paper manually from optional Tray 1, rather than |
| ON | automatically from a tray. When MANUAL FEED=ON and |
|
| optional Tray 1 is empty, the printer goes offline when it |
|
| receives a print job. It then displays MANUALLY FEED [PAPER |
|
| SIZE]. |
|
| For more information, see Manually feeding paper from |
|
| |
|
|
|
EDGE TO EDGE | NO | Turns the |
OVERRIDE=NO | YES | This mode can be overridden inside a print job by an edge- |
|
|
ENWW | Configure device menu 169 |