5Remove the DIMM from the antistatic package. Hold the DIMM with fingers against the side edges and thumbs against the back edge. Align the notches on the DIMM with the DIMM slot. (Check that the locks on each side of the DIMM slot are open, or outward.)
See Installing memory and fonts for the maximum amount of memory for each DIMM slot.
6Press the DIMM straight into the slot (press firmly). Make sure the locks on each side of the DIMM snap inward into place. (To remove a DIMM, the locks must be released.)
7Slide the formatter board back into the printer and tighten the two screws.
184 Appendix C Printer memory and expansion | ENWW |