Message

Explanation or recommended action

 

 

INSERT OR

The specified tray must be inserted or closed for printing to continue.

CLOSE TRAY xx

 

For help press

 

 

 

INSTALL CARTRIDGE

The print cartridge has been removed or has been installed incorrectly. It must

For help press

be replaced or reinstalled correctly for printing to continue.

 

 

Insufficient memory to load Fonts/Data

For help press

alternates with

[DEVICE]

To continue press

The printer does not have enough memory to load the data (for example, fonts or macros) from the location specified. Touch OK to continue without this information.

If the message persists, add more memory.

LOAD TRAY XX [TYPE] [SIZE]

To use another tray press .

alternates with

LOAD TRAY XX [TYPE] [SIZE]

For help press

A job is sent that requires a specific type and size that is not available.

Load the requested paper into optional Tray 1.

Press to use a type and size that is available in another tray.

LOAD TRAY XX

The tray is empty or is configured for a different size of paper than the size that

[TYPE] [SIZE]

was requested.

 

For help press

 

 

 

 

 

MANUALLY FEED

Load the requested paper into optional Tray 1.

[TYPE] [SIZE]

To override the message, press

if the desired paper is available in another

 

 

For help press

tray.

 

 

alternates with

Press

to use a type and size that is available in another tray.

To use another tray

 

 

 

press

.

 

 

 

 

 

No job to cancel

The STOP button was pressed, but there is no active job or buffered data to

 

 

cancel.

 

 

The message appears for approximately two seconds before the printer returns to the READY state.

NON-HP SUPPLY

INSTALLED

alternates with

Economode disabled

The printer has detected that the supply is not a genuine HP cartridge, and the message appears for approximately 30 seconds before the printer is returned to the READY state. If you think you purchased an HP print cartridge, go to www.hp.com/go/anticounterfeit. Any printer repair that is required as a result of using a non-HP print cartridge is not covered under the printer warranty.

ORDER CARTRIDGE LESS THAN XXXX PAGES

For help press

The print cartridge is low and the CARTRIDGE LOW setting in the SYSTEM SETUP submenu is set to CONTINUE. Approximately 2 weeks of typical printing capacity remains in the cartridge. This offers sufficient time to order a new cartridge.

ENWW

Resolving control-panel messages 121