Item | Values | Explanation |
|
|
|
PERSONALITY=AUTO AUTO PCL PS PDF XHTML MIME
Select the default printer language (personality). Possible values are determined by which valid languages are installed in the printer.
Normally you should not change the printer language (the default is AUTO). If you change it to a specific printer language, the printer does not automatically switch from one language to another unless specific software commands are sent to the printer.
CLEARABLE | ON | Set the amount of time that a clearable warning appears on |
WARNINGS= | JOB | the printer control panel. |
JOB |
| ON: Warning messages appear on the control panel until |
|
| |
|
| is pressed. |
|
| JOB: Warning messages appear on the control panel until the |
|
| end of the job from which they were generated. |
|
|
|
AUTO CONTINUE=ON ON OFF
Determine how the printer reacts to errors.
ON: If an error prevents printing, the message is displayed, and the printer goes offline for 10 seconds before returning online.
OFF: If an error prevents printing, the message remains on
the display, and the printer does not print until 
is pressed.
Note
To stop printing when out of staples (when a stapler accessory is installed), set AUTO CONTINUE=OFF on the
CARTRIDGE LOW= | CONTINUE | Determine how the printer functions when toner is low. The |
CONTINUE | STOP | CARTRIDGE LOW message first appears when the print |
|
| cartridge is almost out of toner. (About 2400 pages can still |
|
| be printed at 5% coverage.) |
|
| CONTINUE: The printer continues to print while the CARTRIDGE |
|
| LOW message is displayed. |
|
| STOP: The printer goes offline and wait for further action. |
|
| For more information, see Managing the print cartridge. |
|
|
|
CARTRIDGE OUT= | STOP | Determine how the printer functions when toner is out. |
CONTINUE | CONTINUE |
|
|
|
|
JAM RECOVERY= | AUTO |
AUTO | ON |
| OFF |
Determine how the printer functions when a jam occurs.
AUTO: The printer automatically selects the best mode for printer jam recovery (usually ON). This is the default setting.
ON: The printer automatically reprints pages after a paper jam is cleared.
OFF: The printer does not reprint pages following a paper jam. Printing performance might be increased with this setting.
LANGUAGE=ENGLISH | List of | Sets the language that is used on the control panel. |
| available |
|
| languages |
|
|
|
|
174 Appendix B | ENWW |