WARNING!
CAUTION
Note
The formatter has sharp edges.
3Grasp the screws and pull the formatter board out of the printer. Place it on a flat, non- conductive surface.
4Remove the compact flash from the antistatic package. Hold the compact flash with fingers against the side edges and thumbs against the back edge. Align the notches on the compact flash with the compact flash slot.
5Press the compact flash straight into the slot.
Do not insert the flash memory card at an angle.
The first flash memory slot marked “Firmware Slot” is reserved for firmware only. Slots 2 and 3 should be used for all other solutions.
186 Appendix C Printer memory and expansion | ENWW |