5Set the Custom/Standard switch to Standard.
6Close the tray.
7Look at the control panel within a few seconds of closing the tray. (Open and close the tray if the time has already elapsed.) The control panel indicates the tray size and type configuration. Complete one of the following actions:
• If the size and type settings are correct, press 
to accept the settings.
• If the size and type settings are not correct, press | . The TRAY X SIZE=*<SIZE> menu |
appears. |
|
8To change the size setting, use 
or 
to scroll to the correct size and then press 
. The message SETTING SAVED appears for a moment, and then the tray type menu appears.
Note | Depending on the size that you selected, the printer might prompt you to move the Custom/ |
| Standard switch in the tray to another position. The printer might also prompt you to move the |
| paper guides. Follow the instructions on the control panel, close the tray, and then repeat this |
| procedure starting with step 7. |
|
|
9To change the type setting, use 
or 
to scroll to the correct type and then press 
. The message SETTING SAVED appears for a moment, and then the current size and type settings appear.
10If the size and type settings are correct, press 
to accept the settings. The tray is ready to use.
ENWW | Loading input trays 41 |