I/O submenu
Items in the I/O (input/output) menu affect the communication between the printer and the computer.
I/O timeout submenu
Item | Values | Explanation |
|
|
|
I/O TIMEOUT=15 | 5 to 300 | Select the I/O timeout period in seconds. (I/O timeout refers to the |
|
| time, measured in seconds, that the printer waits before ending a |
|
| print job.) |
|
| This setting allows you to adjust timeout for best performance. If |
|
| data from other ports appear in the middle of your print job, |
|
| increase the timeout value. |
|
| |
Parallel input submenu |
|
Item | Values | Explanation |
|
|
|
HIGH SPEED=YES | YES | The printer accepts faster parallel communications used for |
| NO | connections with newer computers. |
|
|
|
ADVANCED | ON | Turn the bidirectional parallel communication on or off. The default |
FUNCTIONS=ON | OFF | is set for a bidirectional parallel port |
|
| This setting allows the printer to send status readback messages |
|
| to the computer. (Turning the parallel advanced functions on might |
|
| slow language switching.) |
|
|
|
EIO X Jetdirect submenu
The EIO (enhanced input/output) submenu appears only when an EIO device is installed in an EIO slot on the printer (such as an HP Jetdirect print server). The items in the menu depend on the particular accessory product installed. If the printer contains an HP Jetdirect print server EIO card, you can configure basic networking parameters using the EIO menu. These and other parameters can also be configured through HP Web Jetadmin or other network configuration tools (such as by using Telnet or browsing the embedded Web server).
For more information about the EIO submenu, see the documentation that came with the EIO Jetdirect card.
ENWW | Configure device menu 175 |