Envelope margins
The following table gives typical address margins for a Commercial #10 or DL envelope.
|
| Type of address | Top margin | Left margin | |
|
|
|
|
|
|
|
| Return address | 15 mm (0.6 inch) | 15 mm (0.6 inch) | |
|
|
|
|
|
|
|
| Delivery address | 51 mm (2 inches) | 85 mm (3.5 inches) | |
|
|
|
| ||
|
|
|
|
|
|
Note |
| For the best print quality, position margins no closer than 15 mm (0.6 inch) from the edges of the | |||
|
| envelope. |
|
|
|
|
|
|
|
|
|
Paper specifications
HP LaserJet printers produce excellent print quality. This printer accepts a variety of media, such as
The printer can use a variety of paper and other print media in accordance with the guidelines in this manual. Paper that does not meet these guidelines can cause the following problems:
●Poor print quality
●Increased jams and
●Premature wear on the printer, requiring repair
For best results, use only HP brand paper and print media.
It is possible for paper to meet all of the guidelines in this manual and still not produce satisfactory results. This might be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which HP has no control.
Before purchasing a large quantity of paper, make sure it meets the requirements specified in this user guide and in the Guidelines for Paper and Other Print Media guide. Always test paper before purchasing a large quantity. For more information, see www.hp.com/go/ljpaper.
CAUTION | Using paper outside HP specifications can cause problems for the printer, requiring repair. This |
| repair is not covered by the HP warranty or service agreements. |
|
|
156 Appendix A Specifications | ENWW |