Note
CAUTION
Note
3Adjust the paper guides so that they lightly touch the paper stack, but do not bend the paper.
4Make sure that the paper fits under the tabs on the guides and that the stack does not extend above the
If printing on A3, 11 x 17, or other long media, also pull out the tray extension until it stops.
5Look at the
•If TRAY X <TYPE> <SIZE> does not appear on the
•If TRAY X <TYPE> <SIZE> appears on the 
to change the size and type configuration. The Size menu appears.
6Press 
to highlight ANY SIZE.
7Press 
to select ANY SIZE. The message SETTING SAVED appears on the
8When the Type menu appears, press 
to highlight ANY TYPE.
9Press 
to select ANY TYPE. The message SETTING SAVED appears on the
10If TRAY 1 ANY SIZE ANY TYPE appears on the
for intermittent use of a variety of paper sizes and types. Press 
to accept the size and type setting.
To load optional Tray 1 when the same paper is used for multiple print jobs
Use the following procedure if Tray 1 is usually loaded with the same type of paper, and the paper is not usually removed from Tray 1 between print jobs. The following procedure can usually increase the printer performance when printing from Tray 1.
To avoid a jam, never add or remove paper from a tray while printing from that tray.
1On the control panel, press 
to open the menus.
2Use 
or 
to scroll to PAPER HANDLING and then press 
.
3Use 
or 
to scroll to TRAY 1 SIZE and then press 
.
4Use 
or 
to scroll to the correct size and then press 
. The message SETTING SAVED appears on the
If you select CUSTOM as the paper size, also select the unit of measure (the X and Y dimensions).
ENWW | Loading input trays 37 |