Use the following table to interpret the status LED on the optional
Light | Optional | Optional output device |
| input tray (Tray 4) | stacker, |
|
| multifunction finisher, or |
|
| mailbox) |
|
|
|
Solid green | The accessory is on and | The accessory is on and ready. |
| ready. |
|
|
|
|
Blinking green | The accessory is in service | The accessory is in service mode. |
| mode. |
|
|
|
|
Solid amber | The accessory is | The accessory is experiencing a hardware |
| experiencing a hardware | malfunction. |
| malfunction. |
|
|
|
|
Blinking amber | The accessory has a jam, or |
| a page needs to be removed |
| from the tray, even if the |
| page is not jammed. |
| The vertical transfer door |
| might be open. |
The accessory has a jam, or a page needs to be removed from the unit, even if the page is not jammed.
The accessory is not correctly attached to the printer.
Off | The printer might be in |
| Sleep mode. Press any |
| button of your choice. |
| The accessory is not |
| receiving power. |
The printer might be in Sleep mode. Press any button of your choice.
The accessory is not receiving power.
ENWW | Layout and basic operation of the control panel 17 |