Checking memory installation

Follow this procedure to verify that memory is installed correctly:

1Check that READY appears on the printer control-panel display when the printer is turned on. If an error message appears, a DIMM might have been incorrectly installed.

2Press 22 on the numeric keypad. The configuration page prints.

3Check the memory section on the configuration page and compare it to the configuration page printed before the DIMM installation. If the amount of memory has not increased, one of the following situations might have occurred:

•The memory might not be installed correctly. Repeat the installation procedure.

•The memory might be defective. Try a new DIMM, or try installing the DIMM in a different slot.

Note

If you installed a printer language (personality), check the Installed Personalities and Options

 

section on the configuration page. This area should list the new printer language.

 

 

188 Appendix C Printer memory and expansion

ENWW