3Locate and lift up the two blue levers.
Note | Return the fuser levers to the down position after printing an envelope. |
4Close the left door.
CAUTION
CAUTION
To print envelopes from a program
1Load envelopes into optional Tray 1.
2In your program or in the printer driver, select optional Tray 1 as the source.
3Set the appropriate envelope size and type. For envelope specifications, see Paper specifications, or go to www.hp.com/support/lj9050_lj9040.
4If your program does not automatically format an envelope, specify “Portrait” for page orientation.
To avoid a printer jam, do not remove or insert an envelope after you begin printing.
5Set margins to within 15 mm (0.6 inch) from the edge of the envelope. For best print quality, set margins for a return and mailing address (typical address margins for a Commercial #10 or DL envelope are offered). Avoid printing over the area where the three back flaps meet on the back of an envelope.
6To print by type and size of paper, see Specifying paper to print on, or go to www.hp.com/support/lj9050_lj9040.
7Select the standard output bin (the default) as the output location. If you print envelopes to the stacker, stacker/stapler, or multifunction finisher, they exit to the
8When finished, return the fuser levers to the down position.
Failure to return levers to the down position for standard paper types can result in poor print quality.
ENWW | Printing envelopes 59 |