![](/images/backgrounds/286712/hp-hp-laserjet-9050dn-laser-printer-q3723aaba-users-manual-548900124x1.png)
Message | Explanation or recommended action |
|
|
Paused | The product is paused but no errors. exist The product will continue to receive |
To return to ready | data until the memory is full. |
press STOP |
|
|
|
PERFORM PRINTER | The printer has passed its prescribed printed page threshold between |
MAINTENANCE | maintenance procedures. |
For help press | To ensure optimum print quality, the printer prompts you to perform routine |
| maintenance every 350,000 pages. To order a printer maintenance kit, see the |
| HP support flyer or go to www.hp.com/support/lj9050_lj9040. |
|
|
Performing | The printer is performing a firmware upgrade. |
upgrade |
|
|
|
Receiving upgrade | The printer is receiving a firmware upgrade. |
|
|
Reinsert Duplexer | The duplexer has been removed. Reinsert it. |
|
|
Request accepted | A user requested an internal page. When the current job has finished, the |
please wait | internal page will be printed. |
|
|
REPLACE CARTRIDGE | The print cartridge has reached the “out” level. TheCARTRIDGE=LOW menu has |
For help press | been set to CONTINUE. Printing will continue until no more toner is available. |
|
|
REPLACE STAPLER | The external stapling device is out of staples. Replace the staple cartridge. |
CARTRIDGE |
|
To continue press |
|
|
|
REPLACE STAPLES | The external stapling device is out of staples. Replace the staple cartridge. |
To continue press |
|
|
|
SANITIZING DISK | The hard disk or compact flash disk is being cleaned. Contact your network |
<x>% COMPLETE | administrator. |
Do not power off |
|
|
|
SIZE MISMATCH IN | Tray xx is loaded with paper that is longer or shorter in the feed direction than |
TRAY xx | the size configured for the tray. |
For help press |
|
|
|
STAPLER ALIGN ERROR | The paper in the external paper handling device is not aligned. |
|
|
STAPLER LOW | The stapler device is running out of staples and needs to be refilled. |
ON STAPLES |
|
For help press |
|
|
|
STAPLER OUT OF | The stapler device is out of staples and needs to be refilled. |
STAPLES |
|
For help press |
|
|
|
STAPLING INTERRUPTION | Remove the jammed staple. |
122 Chapter 6 Problem solving | ENWW |