
System Configuration
CLI Commands for Downloading Software from a TFTP Server – Use the copy tftp file command from the Exec mode and then specify the file type, name, and IP address of the TFTP server. When the download is complete, the dir command can be used to check that the new file is present in the access point file system. To run the new software, use the reset board command to reboot the access point.
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:1
TFTP Source file
TFTP Server IP:192.168.1.19
| ||
File Name | Type | File Size |
2 | 1319939 | |
2 | 1629577 | |
syscfg | 5 | 17776 |
syscfg_bak | 5 | 17776 |
262144 byte(s) available |
|
|
| ||
Reboot system now? <y/n>: y |
|
|