SMC Networks SMC2555W-AG manual Local

System Configuration

remove an entry from the table, use the address filter delete command. To display the current settings, use the show authentication command from the Exec mode.

SMC-AP(config)#mac-authentication server local		6-57
SMC-AP(config)#address filter default denied		6-54
SMC-AP(config)#address filter entry 00-70-50-cc-99-1a denied		6-55
SMC-AP(config)#address filter entry 00-70-50-cc-99-1b allowed
SMC-AP(config)#address filter entry 00-70-50-cc-99-1c allowed
SMC-AP(config)#address filter delete 00-70-50-cc-99-1c		6-56
SMC-AP(config)#exit
SMC-AP#show authentication		6-59
Authentication Information
=========================================================
MAC Authentication Server	: LOCAL
MAC Auth Session Timeout Value	: 300 secs
802.1x	: DISABLED
Broadcast Key Refresh Rate	: 5 min
Session Key Refresh Rate	: 5 min
802.1x Session Timeout Value	: 300 secs
Address Filtering	: DENIED

System Default : DENY addresses not found in filter table. Filter Table

MAC Address	Status
-----------------	----------
00-70-50-cc-99-1a	DENIED
00-70-50-cc-99-1b	ALLOWED

=========================================================

SMC-AP#

CLI Commands for RADIUS MAC Authentication – Use the mac-authentication server command from the global configuration mode to enable remote MAC authentication. Set the timeout value for re-authentication using the mac-authenticationsession-timeoutcommand. Be sure to also configure

5-18