SMC Networks SMC2555W-AG manual Configuring Sntp

Advanced Configuration

number to use on the Syslog server. To view the current logging settings, use the show logging command.

SMC-AP(config)#logging on			6-24
SMC-AP(config)#logging level		alert	6-26
SMC-AP(config)#logging console			6-25
SMC-AP(config)#logging host 1 10.1.0.3 514			6-24
SMC-AP(config)#logging facility-type 19			6-27
SMC-AP(config)#exit
SMC-AP#show logging			6-27
Logging Information
============================================
Syslog State	: Enabled
Logging Host State	: Enabled
Logging Console State	: Enabled
Server Domain name/IP	: 1 10.1.0.3
Logging Level	: Error
Logging Facility Type	: 16

=============================================

SMC-AP#

Configuring SNTP

Simple Network Time Protocol (SNTP) allows the SMC2555W-AG to set its internal clock based on periodic updates from a time server (SNTP or NTP). Maintaining an accurate time on the access point enables the system log to record meaningful dates and times for event entries. If the clock is not set, the access point will only record the time from the factory default set at the last bootup.

The SMC2555W-AG acts as an SNTP client, periodically sending time synchronization requests to specific time servers. You can configure up to two time server IP addresses. The access point will attempt to poll each server in the configured sequence.

5-37