SMC Networks SMC2555W-AG manual Show interface wireless g command

Radio Interface

encryption command to enable WEP encryption. Use the multicast-ciphercommand to select WEP cipher type. To enter WEP keys, use the key command, and then set one key as the transmit key using the transmit-keycommand. Then disable 802.1x port authentication with the 802.1x command. To view the current security settings, use the show interface wireless a or

show interface wireless g command.

SMC-AP(config)#interface wireless g			6-68
Enter Wireless configuration		commands, one per line.
SMC-AP(if-wireless g)#authentication shared			6-83
SMC-AP(if-wireless g)#encryption 128			6-84
SMC-AP(if-wireless g)#multicast-cipher wep			6-89
SMC-AP(if-wireless g)#key 1 128 ascii abcdeabcdeabc			6-85
SMC-AP(if-wireless g)#transmit-key 1			6-86
SMC-AP(if-wireless g)#end
SMC-AP(config)#no 802.1x			6-51
SMC-AP(config)#end
SMC-AP#show interface wireless g			6-95
Wireless Interface 802.11g	Information
==========================================================
----------------Identification----------------------------
Description	: Enterprise 802.11g Access Point
SSID	: r&d
Turbo Mode	: OFF
Channel	:	11 (AUTO)
Status	: Enable
----------------802.11 Parameters-------------------------
Transmit Power	: FULL (13 dBm)
Max Station Data Rate	: 54Mbps
Fragmentation Threshold	:	2346 bytes
RTS Threshold	:	2347 bytes
Beacon Interval	:	100 TUs
DTIM Interval	:	2 beacons
Maximum Association	:	64 stations

5-55