Command Line Interface

interface

This command configures an interface type and enters interface configuration mode.

Syntax

interface <ethernet wireless <a g>>

ethernet - Interface for wired network.

wireless - Interface for wireless clients.

a - 802.11a radio interface.

g - 802.11g radio interface.

Default Setting

None

Command Mode

Global Configuration

Example

To specify the 10/100Base-TX network interface, enter the following command:

SMC-AP(config)#interface ethernet

SMC-AP(if-ethernet)#

dns server

This command specifies the address for the primary or secondary domain name server to be used for name-to-address resolution.

Syntax

dns primary-server <server-address>dns secondary-server <server-address>

primary-server- Primary server used for name resolution.

secondary-server- Secondary server used for name resolution.

server-address- IP address of domain-name server.

6-68

Page 196
Image 196
SMC Networks SMC2555W-AG manual Dns server, Syntax Interface ethernet wireless a g