System Defaults
System Defaults
The following table lists some of the access point’s basic system defaults. To reset the access point defaults, use the CLI command “reset configuration” from the Exec level prompt.
Feature | Parameter | Default | |
|
|
| |
Identification | System Name | Enterprise AP | |
|
|
| |
Administration | User Name | admin | |
|
|
| |
| Password | smcadmin | |
|
|
| |
General | HTTP Server | Enabled | |
|
|
| |
| HTTP Server Port | 80 | |
|
|
| |
TCP/IP | DHCP | Enabled | |
|
|
| |
| IP Address | 192.168.2.2 | |
|
|
| |
| Subnet Mask | 255.255.255.0 | |
|
|
| |
| Default Gateway | 0.0.0.0 | |
|
|
| |
| Primary DNS IP | 0.0.0.0 | |
|
|
| |
| Secondary DNS IP | 0.0.0.0 | |
|
|
| |
RADIUS | IP Address | 0.0.0.0 | |
(Primary and |
|
| |
Port | 1812 | ||
Secondary) | |||
|
| ||
| Key | DEFAULT | |
|
|
| |
| Timeout | 5 seconds | |
|
|
| |
| Retransmit attempts | 3 | |
|
|
|
