SMC Networks SMC2555W-AG manual PRE Shared KEY

System Configuration

----------------Security		----------------------------------
Closed System			: DISABLED
Multicast cipher			: WEP
WPA clients			: SUPPORTED
WPA Key Mgmt Mode		:	PRE SHARED KEY
WPA PSK Key Type		:	HEX
Encryption			: 128-BIT ENCRYPTION
Default Transmit Key			: 1
Static Keys :
Key 1: *****	Key 2: EMPTY			Key 3: EMPTY	Key 4: EMPTY
Authentication Type			: SHARED

==========================================================

SMC-AP#

Note: The index and length values used in the key command must be the same values used in the encryption and transmit-keycommands.

CLI Commands for WEP over 802.1x Security – From the 802.11a or 802.11g interface configuration mode, use the authentication command to select open system authentication. Use the multicast-ciphercommand to select WEP cipher type. Then set 802.1x to required with 802.1x command, and disable MAC authentication with the mac-authenticationcommand. To view the current 802.11g security settings, use the show interface wireless g command (not shown in example).

SMC-AP(config)#interface wireless g	6-68
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless g)#authentication open	6-83
SMC-AP(if-wireless g)#encryption 128	6-84
SMC-AP(if-wireless g)#multicast-cipher wep	6-89
SMC-AP(if-wireless g)#end
SMC-AP(config)#802.1x required	6-51
SMC-AP(config)#no mac-authentication	6-57
SMC-AP(config)#

5-56