Command Line Interface

Related Commands

ip address (page 6-69)

shutdown

This command disables the Ethernet interface. To restart a disabled interface, use the no form.

Syntax

shutdown no shutdown

Default Setting

Interface enabled

Command Mode

Interface Configuration (Ethernet)

Command Usage

This command allows you to disable the Ethernet port due to abnormal behavior (e.g., excessive collisions), and reenable it after the problem has been resolved. You may also want to disable the Ethernet port for security reasons.

Example

The following example disables the Ethernet port.

SMC-AP(if-ethernet)#shutdown

SMC-AP(if-ethernet)#

show interface ethernet

This command displays the status for the Ethernet interface.

Syntax

show interface [ethernet]

6-72

Page 200
Image 200
SMC Networks SMC2555W-AG manual Show interface ethernet, Syntax Shutdown no shutdown Default Setting