
Command Line Interface
Command Mode
Interface Configuration (Wireless)
Command Usage
The beacon signals allow wireless clients to maintain contact with the access point. They may also carry
Example
dtim-period
This command configures the rate at which stations in sleep mode must wake up to receive broadcast/multicast transmissions.
Syntax
dtim-period <interval>
interval - Interval between the beacon frames that transmit broadcast or multicast traffic. (Range:
Default Setting
2
Command Mode
Interface Configuration (Wireless)
Command Usage
•The Delivery Traffic Indication Map (DTIM) packet interval value indicates how often the MAC layer forwards broadcast/multicast traffic. This parameter is necessary to wake up stations that are using Power Save mode.
•The DTIM is the interval between two synchronous frames with broadcast/multicast information. The default value of 2