Advanced Configuration

CLI Commands for Bridge Filtering – Use the filter local-bridgecommand from the global configuration mode to prevent wireless-to-wireless communications through the access point. Use the filter ap-managecommand to restrict management access from wireless clients. To configure Ethernet protocol filtering, use the filter ethernet-type enable command to enable filtering and the filter ethernet-type protocol command to define the protocols that you want to filter. To remove an entry from the table, use the address filter delete command. To display the current settings, use the show filters command from the Exec mode.

SMC-AP(config)#filter local-bridge

6-60

SMC-AP(config)#filter ap-manage

6-61

SMC-AP(config)#filter ethernet-type enable

6-62

SMC-AP(config)#filter ethernet-type protocol ARP

6-63

SMC-AP(config)#exit

 

SMC-AP#show filters

6-64

Protocol Filter Information

=========================================================

Local Bridge

:ENABLED

AP Management

:ENABLED

Ethernet Type Filter :ENABLED

Enabled Protocol Filters

---------------------------------------------------------

Protocol: ARP

ISO: 0x0806

=========================================================

SMC-AP#

5-25

Page 83
Image 83
SMC Networks SMC2555W-AG manual AP Management