System Configuration
AP System Configuration – The AP System Configuration table displays the basic system configuration settings:
•System Up Time: Length of time the management agent has been up.
•MAC Address: The physical layer address for this device.
•System Name: Name assigned to this system.
•System Contact: Administrator responsible for the system.
•IP Address: IP address of the management interface for this device.
•IP Default Gateway: IP address of the gateway router between this device and management stations that exist on other network segments.
•HTTP Server: Shows if management access via HTTP is enabled.
•HTTP Server Port: Shows the TCP port used by the HTTP interface.
•Firmware Version: Shows the version number for the runtime code.
AP Wireless Configuration – The AP Wireless Configuration table displays the wireless interface settings listed below. Note that Radio 1 refers to the 802.11a interface and Radio 2 refers the 802.11b/g interface.
•SSID: The service set identifier for this wireless group.
•802.1x: Shows if IEEE 802.1x access control for wireless clients is enabled.
•Radio Channel: The radio channel through which the access point communicates with wireless clients.
•Radio Encryption: The key size used for data encryption.
•Radio Authentication Type: Shows if open system or shared key authentication is used.
