System Configuration

TCP / IP Settings

Configuring the SMC2555W-AG with an IP address expands your ability to manage the access point. A number of access point features depend on IP addressing to operate.

Note: You can use the web browser interface to access IP addressing only if the access point already has an IP address that is reachable through your network.

By default, the SMC2555W-AG will be automatically configured with IP settings from a Dynamic Host Configuration Protocol (DHCP) server. However, if you are not using a DHCP server to configure IP addressing, use the CLI to manually configure the initial IP values (page 4-3). After you have network access to the access point, you can use the web browser interface to modify the initial IP configuration, if needed.

Note: If there is no DHCP server on your network, or DHCP fails, the access point will automatically start up with a default IP address of 192.168.2.2.

5-6

Page 64
Image 64
SMC Networks SMC2555W-AG manual TCP / IP Settings