System Configuration
5-32•Obtain the IP address of the FTP or TFTP server where the
access point software is stored.
•If upgrading from an FTP server, be sure that you have an
account configured on the server with a user name and
password.
•If VLANs are configured on the access point, determine the
VLAN ID with which the FTP or TFTP server is associated,
and then configure the management station, or the network
port to which it is attached, with the same VLAN ID. If you are
managing the access point from a wireless client, the VLAN ID
for the wireless client must be configured on a RADIUS server.
Current version – Version number of runtime code.
Firmware Upgrade Local – Downloads an operation code image
file from the web management station to the access point using
HTTP. Use the Browse button to locate the image file locally on
the management station and click Start Upgrade to proceed.
•New firmware file: Specifies the name of the code file on the
server. The new firmware file name should not contain slashes
(\ or /), the leading letter of the file name should not be a period
(.), and the maximum length for file names is 32 characters for
files on the access point. (Valid characters: A-Z, a-z, 0-9, “.”,
“-”, “_”)