
Interface Commands
indicates that the access point will save all broadcast/ multicast frames for the Basic Service Set (BSS) and forward them after every second beacon.
•Using smaller DTIM intervals delivers broadcast/multicast frames in a more timely manner, causing stations in Power Save mode to wake up more often and drain power faster. Using higher DTIM values reduces the power used by stations in Power Save mode, but delays the transmission of broadcast/multicast frames.
Example
fragmentation-length
This command configures the minimum packet size that can be fragmented when passing through the access point.
Syntax
fragmentation-length <length>
length - Minimum packet size for which fragmentation is allowed. (Range:
Default Setting
2346
Command Mode
Interface Configuration (Wireless)
Command Usage
•If the packet size is smaller than the preset Fragment size, the packet will not be segmented.
•Fragmentation of the PDUs (Package Data Unit) can increase the reliability of transmissions because it increases the probability of a successful transmission due to smaller frame size. If there is significant interference present, or