
Advanced Configuration
Primary Radius Server Setup – Configure the following settings to use RADIUS authentication on the access point.
•IP Address: Specifies the IP address of the RADIUS server.
•Port: The UDP port number used by the RADIUS server for
authentication messages. (Range:
Default: 1812)
•Key: A shared text string used to encrypt messages between the access point and the RADIUS server. Be sure that the same text string is specified on the RADIUS server. Do not use blank spaces in the string. (Maximum length: 255 characters)
•Timeout: Number of seconds the access point waits for a reply from the RADIUS server before resending a request. (Range:
•Retransmit attempts: The number of times the access point tries to resend a request to the RADIUS server before