SMC Networks SMC2555W-AG manual Disabled

Advanced Configuration

CLI Commands for System Identification – Enter the global configuration mode, and use the system name command to specify a new system name. Enter the wireless configuration mode (either 11a or 11g), and use the ssid command to set the service set identifier. Then return to the Exec mode, and use the show system command to display the changes to the system identification settings.

SMC AP#configure				6-11
SMC-AP(config)#system			name R&D	6-20
SMC-AP(config)#interface wireless a				6-68
SMC-AP(if-wireless a)#ssid r&d				6-79
SMC-AP(if-wireless a)#end				6-12
SMC-AP#show	system			6-33
System Information
===================================================
Serial Number		:	A324003220
System Up time		:	0 days, 0 hours, 32 minutes, 51 seconds
System Name		: r&d
System Location		:
System Contact		: Contact
System Country Code : US - UNITED STATES
MAC Address		:	00-30-F1-91-91-5B
IP Address		:	192.168.2.51
Subnet Mask		:	255.255.255.0
Default Gateway		:	192.168.2.250
VLAN State		:	DISABLED
Native VLAN	ID	:	1
IAPP State		:	ENABLED
DHCP Client		:	ENABLED
HTTP Server		:	ENABLED
HTTP Server	Port	:	80
Slot Status		:	Dual band(a/g)
Software Version		:	v3.0.02

===================================================

SMC-AP#

5-5