Advanced Configuration

Upgrading Firmware

You can upgrade new SMC2555W-AG software from a local file on the management workstation, or from an FTP or TFTP server. New software may be provided periodically on SMC’s web site (http://www.smc.com).

After upgrading new software, you must reboot the SMC2555W-AG to implement the new code. Until a reboot occurs, the SMC2555W-AG will continue to run the software it was using before the upgrade started. After rebooting the access point with new software, we advise resetting the configuration to the factory default settings.

Before upgrading new software, verify that the SMC2555W-AG is connected to the network and has been configured with a compatible IP address and subnet mask.

If you need to download from an FTP or TFTP server, take the following additional steps:

5-31

Page 89
Image 89
SMC Networks SMC2555W-AG manual Upgrading Firmware